Atlas BP12000X 12,000 lb Baseplate 2 Post Lift

The Atlas BP12000X Commercial Grade Lift
The Atlas® BP12000X is a commercial grade heavy duty 12,000 LB. capacity 2 post base plate above ground lift. This above ground lift has over sized columns, symmetric three stage arms, and single point lock release. This lift is perfect for those commercial garages that want to lift heavier vehicles but have limited ceiling height. The Atlas® BP12000X can be installed at two different width settings to accommodate wider trucks or trailers and to facilitate “driving between” the lift columns.
.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Features

12,000 lb. Capacity

Heavy Duty, Commercial Grade

Baseplate, Open-Top Style Lift

Overall Height: 122 1/2″ (10′ 2 1/2″)

Adjustable Width

3-Stage Symmetric Arms

Automatic Arm Restraints

Single-Point Lock Release

Rubber Guards on Carriages

Dual Hydraulic Chain-Over Cylinders

Powder Coat Finish

Free 12 piece Truck Adapter Set

Mounting Hardware Included

Shipping Weight: 2,130 lbs.

5 yr Structural – 2 yr Hydraulic Warranty – Parts Only

Atlas® ATTD-BP12000X Specifications

Capacity
12,000 LB.

Overall Height
122 1/2″ (10’ 2 1/2″)

Overall Floor Width
149 3/8″ (12’ 5 3/8″) or 154 1/2” (12’ 10 1/2”)

Outside Column to Outside Column
135 7/8″ (11’ 3 7/8″) or 141 1/4″ (11’ 9 1/4”)

Maximum Lift Height (Without Adapters)
77 1/2″

Maximum Lift Height (With Adapters)
88 1/2″

Minimum Arm Height
4″

Inside Column
118 1/8” (9’ 10 1/8”) or 123 1/2″ (10’ 3 1/2″)

Drive Thru
103 5/8” (8’ 7 5/8”) or 109” (9’ 1”)

Column Size
8 3/4″ x 14″

Column Thickness of Steel
6mm

Base Of Lift
18 1/2″ x 21 1/2″

Motor/Electrical Requirement
220 volt single (1) phase.A 30 amp breaker is recommended

Oil Requirement
3-5 Gallons AW32/AW46 (NOT INCLUDED)

Shipping Weight
2,130 LBS.

Adapter Heights
4 Each 2”, 3”, 6”

Arm Hole/Adapter Peg Size
1.5”

Requires a minimum of 6″ of concrete with a 3000 psi. rating

Documents
Atlas® ATTD-BP12000X Manual
Atlas® BP12000 Cylinder Bleeding Procedure (Do this immediately after installation)