Bendpak xpr-12cl-192 extra tall, 12,000 lb. capacity, ali certified clearfloor, triple-telescope arms-all four
$3,085.51
The Bendpak xpr-12cl-192 extra tall, 12,000 lb. capacity, ali certified clearfloor, triple-telescope arms-all four is a high-quality lifting solution designed for durability and performance. Perfect for professional automotive workshops and home garages.
BendPak XPR-12C-192 Clearfloor Lift
When you need to lift something heavy—really heavy—BendPak’s XPR-12C-192 is the ultimate solution. Designed with an astounding 12,000-lb. capacity, this clearfloor lift features a reinforced column construction, high-strength carriage, and cutting-edge direct-drive technology. Its extended overhead height allows for superior clearance, making it perfect for shops with ceilings higher than 14 feet. Built with industrial-grade materials, this lift maximizes efficiency while ensuring safety and durability.
Features
- 12,000‐lb. lifting capacity
- Extended overhead height for high-profile vehicles
- Padded overhead safety shutoff bar
- Taller column height for increased clearance
- Single-piece columns (XPR-12CL) with bolt-on extensions (XPR-12CL-192)
- Single-point safety release
- Drop-end arms for lower pad height
- Dual hydraulic direct-drive cylinders
- Oversized 53″ tall carriage for superior strength
- Electric / hydraulic power system
- Oversized A36 steel base plate
- Self-lubricating UHMW polyethylene bearing system
- Safety locks in each column spaced every 3″
- Triple-telescoping front and rear arms
- Automatic arm restraints
- Heavy-duty 1/2″ aircraft-quality equalizer cables
- 6” diameter machined steel cable sheaves reduce cable fatigue
- 8-piece truck and van adapter set included
- Frame cradle pads included
- Round rubber contact pads included
- ALI Certified for maximum safety
Specifications
| Specification | Details |
|---|---|
| Lifting Capacity | 12,000 lbs. (5,443 kg) |
| Max Capacity per Axle | 6,000 lbs. (2,722 kg) |
| Overall Height | 192.7″ (4,895 mm) |
| Overall Width (Base Plate) | 155″ (3,937 mm) |
| Width (Outside Columns) | 144″ (3,658 mm) |
| Inside Columns | 120″ (3,048 mm) |
| Drive-Thru Clearance | 106″ (2,692 mm) |
| Floor to Overhead Switch | 187.7″ (4,768 mm) |
| Front Arm Reach (Min – Max) | 32″-60″ (813-1,524 mm) |
| Rear Arm Reach (Min – Max) | 32″-60″ (813-1,524 mm) |
| Min. Pad Height | 5″ (127 mm) |
| Rise | 69″ (1,753 mm) |
| Max Lift Height (Pad Only) | 74″ (1,880 mm) |
| Max Lift Height (6″ Adapter) | 80″ (2,032 mm) |
| Motor | 220V / 60 Hz / 1 Ph |
| Time to Full Rise | 45 seconds |
| Max Load Per Arm | 3,000 lbs. (1,361 kg) |
Note: BendPak lifts comply with ANSI/ALI ALCTV-2017 standards. For more information, visit www.autolift.org.
